CannuSil tubings were first manufactured in 1992, ever since inception of IV cannula to be Made in India, we were committed to deliver what is to be delivered, by learning from our mistakes, understanding the application & criticality of our tubes, fulfilling all the regulatory compliances and also our team’s continuously improving approach. Today, after 3 decades our CannuSil tubing has the finest tolerance & consistency which enables it to be used all over the world by the majority of the manufacturers.
Sevitsil have expertise in manufacturing medical grade platinum cured silicone micro tubing. Smallest Size - 0.10 mm (100 microns) with wall thickness of 0.20 mm (200 microns)
Sevitsil is only indian manufacturer of Silicone breathing hoses.
Catalog No. | Description | For |
---|---|---|
SSBH-10 MM | Bore diameter of 8 MM | Neonatal |
SSBH-15 MM | Bore diameter of 12 MM | Pediatric |
SSBH-22 MM | Bore diameter of 16 MM | Adult |
We offer hoses in continuous roll form, with & without connector.
Sevitsil's antistatic tube & gaskets is a specifically designed material that prevents the build-up of static electricity in fluids. Silicone product is that protects products from electrostatic discharge. Conductive silicone profiles are loaded with a variety of highly conductive inert particles providing superior performance combined with excellent environmental sealing for dust, water & moisture.
In many medical procedures, more than one activity takes place through the same device. AnekSil tubings have the cutting-edge technology required to produce extremely high-quality catheter tubings, capacity to make 12 lumen tubes can assure you that your requirements will be fulfilled here.
Silicone blister gaskets are widely used for blister packing to ensure best quality of sealing on products throughout various different shapes & sizes for medical device packaging. Sevitsil manufactures blister gaskets very precisely.
Sevitsil provides novel features in its products that targets the concerns, one such area of focus has been the incorporation of antimicrobial agents directly into silicone rubber compositions that are used in production of many of our medical products, the broad objective of which is the reduction of hospital acquired infections.
J-Sil tubes are designed with a modern day technology so that bore diameter is curved as well as ultra smooth which enables to transfer blood in and out with a consistent flow.
Sevitsil offers a unique product, which is not only an excellent UV resistant product but can smartly detect UV Rays, these products are highly in demand where UV rays are to be controlled or immediately observed. All sorts of extruded & molded products can be custom designed. We offer UV-Sil products in two variants reversible & irreversible.
New major developments in silicone based biocompatible polymers are used to produce catheters and other devices that are inserted into the body for interventional procedures. Silicone RadioOpaque products are used in conjunction with detection equipment or devices to identify any possible contamination. These products are designed to work with inline X-Ray detection, metal detection, and magnetic separator equipment for immediate contamination alert.
Silicone suction tubes are used for removal of secretion from mouth, trachea and bronchial tube. Manufactured from non toxic, non irritant medical grade silicone compound. Distal end is open with one lateral eye for effective drainage. Proximal end is provided with a connector for easy connection to the suction equipment. Funnel connectors are color coded for instant size identification.
Sevitsil designed menstrual cups is a reusable feminine hygiene product. Cups can hold more blood than other methods, leading many women to use them as eco-friendly alternative tampons/ sanitary pads. These are easy-to-use and user centered designs that can be re-used for upto 5 years. We customised as per your design as well.
Silicone drainage tube is used in treatment of blood or air circulation and drainage which has superb characteristics like odorless, tasteless, non-toxic, low stimulation, long shelf and chemical resistance. This tube can be sterilized by ethylene oxide, gamma radiations, steam autoclaving.
Silicone molded products can be used for numerous purposes in the medical and healthcare industry. Silicone has an excellent shaping property easing to play with its structure. Sevitsil is a leading manufacturer of silicone molded products. We produce molded silicone products through in-house compression molding.
Sevitsil manufactures multiple range of catheters in clean room class 10000 and conforms to the biocompatibility requirements.
Silicone container closure is a part of container closure systems and is an important component in the packaging of sterile products. It provides a complete aseptic seal for transferring high-purity fluids. container-closures maintain the sterility of parenteral pharmaceuticals and prevent ingress of contamination when a needle is inserted into a vial.
Non Vacuum Rubber Stopper | ||||
---|---|---|---|---|
Article No. | A | B | C | D |
BC-NVS-5013 | 9.46 | 5.18 | 14.06 | 6.50 |
BC-NVS-5044 | 9.50 | 12.13 | 14.03 | 10.85 |
BC-NVS-5075 | 13.30 | 13.60 | 10.85 | 7.20 |
BC-NVS-5085 | 12.70 | 13.72 | 10.93 | 7 |
BC-NVS-5095 | 12.48 | 13.75 | 10.95 | 7.03 |
BC-NVS-7045 | 9.08 | 10.75 | 7 | 4.74 |
Vacuum Rubber Stopper | ||||
---|---|---|---|---|
Article No. | A | B | C | D |
BC-VS-2414 | 10.95 | 11.28 | 14.43 | 5.10 |
BC-VS-2518 | 10.60 | 12.18 | 11.21 | 14.08 |
BC-VS-2528 | 9.85 | 11.30 | 14.30 | 6.10 |
BC-VS-2550 | 12.01 | 15.85 | 13.70 | 5.10 |
Designed with optimized functional properties, our bromobutyle syringe stopper are of high-quality used is disposable and PFS components providing safe and complete solutions for your injectable devices.
Available for 1 ML, 2 ML, 3 ML, 5 ML, 10 ML 20 ML & 60 ML
Sevitsil's polyisoprene rubber stopper is used in Y-site of IV Transfusion Set.
Sevitsil manufactures premium quality of PEG tube. Sizes available : 16 FR, 18 FR, 20 FR & 24 FR Customization is possible as per your sample or drawing.
We also manufacture bolster gasket which is used to support PEG Tube properly. So, while cleaning PEG Tube it does not remove from the internal body.
In many medical procedures, more than one activity takes place through the same device. AnekSil tubings have the cutting-edge technology required to produce extremely high-quality catheter tubings, capacity to make 12 lumen tubes can assure you that your requirements will be fulfilled here.
FDA 21 CFR 177.2600 |
European Pharmacopoeia EP 3.1.9 |
USP Class VI |
German food grade Bfr XV Declaration |
French Pharmacopoeia (France Arrêté du 25) Déclaration |
Biological standard ISO 10993-3 Genotoxicity |
Biological standard ISO 10993-Hemocompatibility |
Biological standard ISO 10993-5 Cytotoxicity |
Biological standard ISO 10993-6 Systemic Toxicity (SubChronic) - 90 Days |
Biological standard ISO 10993-10 Sensitization |
Biological standard ISO 10993-10 Irritation |
Biological standard ISO 10993-11 Rabbit Pyrogen test |
Biological reactivity test, In Vitro USP Class 87 |
Biological reactivity test, In Vivo USP Class 88 |
EC 1935:2004 |
ROHS- 3 As per EU Directive 2015/863 |
ETO or Gamma sterilizable |
Latex free Declaration |
TSE/BSE free Declaration |
WEE Declaration & REACH Declaration |
Extractable & Leachable Study |
Stability Test ( 5 years) |